Install Metal Print
Our mounting system consists of two parts: a strong magnetic receiver that you stick to the wall, and a slim metal plate attached to the back of your print.
Important: For a secure hold, the wall surface must be clean, dry, and perfectly smooth. This system is not recommended for heavily textured plaster or delicate wallpaper. If you’re unsure, test the receiver on a small, inconspicuous area first.
📌 Extended Installation Guide
1. Choose & Prepare Your Wall
- Avoid heavily textured plaster (e.g., “popcorn” or rough finishes) and delicate wallpaper.
- Ideal surfaces are smooth, painted drywall—free of dust, grease, cracks, or loose paint.
2. Clean & Dry the Surface
- Wipe the area with a clean, dry microfiber cloth to remove all dust and dirt.
- If there are greasy spots or uneven patches, gently wipe with isopropyl alcohol, then allow the wall to fully dry.
3. Attach the Magnetic Receiver
- Carefully peel off the backing from the adhesive side.
- Press the receiver firmly onto the wall for 10–15 seconds to ensure a strong bond.
- Allow 5–10 minutes for the adhesive to set before proceeding.
4. Prepare Your Print
- Check that the metal plate on the back of your print is securely attached.
- Remove any protective film from the plate and avoid touching the adhesive surface.
5. Hang & Align Your Print
- Hold your print close to the receiver and let the magnet snap it into place.
- Adjust left or right as needed to achieve perfect alignment.
6. Verify & Maintain
- Gently tug on the print to confirm it’s securely mounted.
- Clean with a dry or lightly damp cloth—no harsh chemicals needed.
Follow these steps for a flawless, damage-free display—and enjoy your metal print for years to come!
Perfectly aligned metal print on a clean wall
🎉 Enjoy your print! For a visual walkthrough, watch our installation video below: